XWCNA1 Android 4.2.2 Jelly Bean update can now be put in in your Galaxy Note 8.zero, the WiFi + 3G variant. We expect a Android 4.three Jelly Bean to come back out very soon however proper now we should not have any sort of ETA. Samsung has simply introduced this firmware so chances are high slim which you can get this update from Samsung KIES or OTA (over-the-air) system. We've an entire guide on tips on how to install this new firmware manually in your tablet using ODIN. You can easily replace Galaxy Note 8.0 N5100 to XWCNA1 Android 4.2.2 Jelly Bean using the tutorial below. Take note, that is an official firmware not a customized build ROM.
As you continue reading below, we'll guide you thru all the technique of how one can set up XWCNA1 Android 4.2.2 on Galaxy Note 8.zero N5100 using ODIN. Don’t neglect to backup all of your apps and private information as you never know while you may end up with a problem. We even have some essential tips that we recommend you to learn and remember before proceeding to the tutorial on the subsequent page. We worth your information and likewise your device’s safety so we now have mentioned tips and quick cuts throughout the information and likewise we wish you to check if your knowledge has been backed up. Let’s continue with the tutorial below.
Galaxy Note 8.0 XWCNA1 Android 4.2.2 Firmware Details:
Model: GT-N5100
Model name: GALAXY Note 8.0
Country: Morocco (MWD)
Version: Android 4.2.2
Changelist: 2420548
Build date: Fri, 10 Jan 2014 11:30:35 +0000
Product Code: MWD
PDA: N5100XWCNA1
CSC: N5100OJVCNA1
MODEM: N5100XXCMJ2
Complete Step-By-Step Instructions:
Step 1 - Download Android 4.2.2 N5100XWCNA1 for Galaxy Note 8.0 to your computer and extract the zip file.
Step 2 - Download ODIN v3.09 which will help you to install Android 4.2.2 on Samsung Galaxy Note 8.0 N5100.
Step 3 - Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy Note 8.0 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your tablet to your computer while it is in the Download Mode.
Step 6 - If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your tablet. These files are to be found from the extracted files in Step 1.
- Click on ‘AP/PDA’ and select file with ‘CODE’ in its name.
- Click on ‘CP/Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 8 - In ODIN, check the
Auto Reboot and
F. Reset Time options. As for the
Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your tablet will restart. After you see the home screen, unplug your tablet from the computer.
That’s it. Your Samsung Galaxy Note 8.0 has now been updated to Android 4.2.2 build XWCNA1 software update. Go to Settings > About phone to verify.
Tentang Blog
Share everything about CSS Trick and Tips
Follow: | Google+ | Facebook |
Enter your email address to get update from CSS Tuts.
Related Posts
Blogger
Google+
Facebook
Twitter