XXU1ANCF Android 4.4.2 firmware is now obtainable for obtain on Samsung Galaxy S5 G900F - the LTE variant of the phone. For some people, this firmware can be pre-put in on the device while some folks might need to replace to this firmware. This replace would be the first ever KitKat software program replace for the Galaxy S5 LTE. At this time is the launch day for the Galaxy S5 and most of you might have already tried to switch the device, in that case you should utilize this information to return to official firmware with all of the factory settings. You'll be able to simply update Galaxy S5 G900F to XXU1ANCF Android 4.4.2 KitKat official firmware- and in addition root Galaxy S5 G900F phone on this firmware. As this can be a branded firmware you might notice some further pre-put in apps and new languages which is totally normal.
As you proceed studying beneath, we will guide you the right way to install XXU1ANCF Android 4.4.2 KitKat on Galaxy S5 LTE G900F using ODIN. We now have additionally given some tips about how you can backup your phone data and have given some other vital tips. Don’t overlook to backup all your apps and personal information as a precaution. We don’t want anyone shedding their information because of any issues. For the rooting tutorial, now we have given the hyperlink under for an entire tutorial. A backup of current knowledge current on the device should be made as their is a potential of information being wiped to the unique factory image. Let’s continue with the tutorial now.
Complete Step-By-Step Instructions:
Step 1 - Download Android 4.4.2 G900FXXU1ANCF for Galaxy S5 to your computer and extract the zip file.
Step 2 - Download ODIN v3.09 which will help you to install Android 4.4.2 on Samsung Galaxy S5 G900F.
Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode. Read: How to Enter Download Mode on Galaxy S5.
Step 4 - Make sure you have your Galaxy S5 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
- Click on ‘AP’ and select file with ‘AP’ in its name.
- Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
- Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.
If you are using an older version of ODIN or flashing a firmware which doesn’t have the above mentioned file name format then look below for the abbreviations to the old name format. Do note that only file name changes, the functionality and back end process remains the same so don’t worry.
- AP = PDA
- BL = Boot Loader
- CP = Modem
Step 8 - In ODIN, check the
Auto Reboot and
F. Reset Time options. As for the
Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy S5 has now been updated to Android 4.4.2 build XXU1ANCF firmware update. Go to Settings > About phone to verify.
Tentang Blog
Share everything about CSS Trick and Tips
Follow: | Google+ | Facebook |
Enter your email address to get update from CSS Tuts.
Related Posts
Blogger
Google+
Facebook
Twitter