Samsung Galaxy TabPRO 10.1 T520 (WiFi) can now be updated with XXUANAE Android 4.4.2 firmware. This is the most recent KitKat software replace for this Android tablet. It may be downloaded from Samsung KIES or straight on your tablet utilizing OTA (over-the-air) feature. It is a region particular firmware, so not all of you'll get it. In that case, you may comply with our tutorial for manually putting in this software program update in your Galaxy TabPRO 10.1. This whole guide will show you each and every step in updating your device with ODIN. You'll be able to simply replace Galaxy TabPRO 10.1 T520 to XXUANAE Android 4.4.2 KitKat utilizing the tutorial below and root Galaxy TabPRO 10.1.
As you continue reading beneath, we will information you thru all the means of how to install XXUANAE Android 4.4.2 on Galaxy TabPRO 10.1 T520 using ODIN. Don’t forget to backup all your apps and private information as you by no means know whenever you would possibly end up with a problem. Now we have laid out helpful suggestions by out the guide so make certain to keep an eye fixed out for them. This serves as a reminder for those who haven’t backed up your data, please do it now earlier than going ahead. Let’s continue with the tutorial below.
Update Samsung Galaxy TabPRO 10.1 T520 to XXUANAE
Complete Step-By-Step Instructions:
Step 2 - Download ODIN v3.09 which will help you to install Android 4.4.2 on Samsung Galaxy TabPRO 10.1 T520.
Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy TabPRO 10.1 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
- Click on ‘PDA’ / ‘AP’ and select file with ‘CODE’ in its name.
- Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy Tab 3 has now been updated to Android 4.4.2 build XXUANAE software update. Go to Settings > About phone to verify.
Tentang Blog
Share everything about CSS Trick and Tips
Follow: | Google+ | Facebook |
Enter your email address to get update from CSS Tuts.
Related Posts
Blogger
Google+
Facebook
Twitter