Root XXU1ANCF Android 4.4.2 on Galaxy S5 G900F Stock Firmware

If your new Samsung Galaxy S5 G900F came with the XXU1ANCF Android 4.4.2 firmware and also you wish to root it, then that is the right guide for you. Now we have a whole information on learn how to root XXU1ANCF Android 4.4.2 which would mean you can install root apps and access system recordsdata in your phone. Why do you have to root? Read: Benefits of rooting an Android device. You possibly can root XXU1ANCF Android 4.4.2 on Galaxy S5 G900F KitKat official firmware using the tutorial below. Please ensure your phone is on this firmware model by going to Settings > About phone. Quite a lot of root tutorials will be coming up very quickly for this new Samsung Galaxy S5.

As you proceed reading additional, we'll information you thru your entire means of how one can root Galaxy S5 G900F on XXU1ANCF Android 4.4.2 KitKat firmware using ODIN. Make sure you backup all your data earlier than trying out the foundation method tutorial below as a result of we don’t need you to lose anything. Rooting will mean you can set up root apps on your phone, i.e Titanium Backup. Read our checklist of the essential root apps it is best to install! Also try to be aware that rooting your phone will fully void you warranty, so please know properly what you're getting into. The following tips are essential as they are going to help the installation process to go smooth without any issues. Let’s continue with the tutorial now.

Complete Step-By-Step Instructions:

Step 1 - Download CF-Auto-Root Android 4.4.2 Package for Samsung Galaxy S5 LTE to your computer and extract the zip file.

Step 2 - Download ODIN v3.09 which will help you to root Android 4.4.2 on Samsung Samsung Galaxy S5 LTE G900F.

Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 - Make sure you have your Samsung Galaxy S5 LTE USB drivers installed on your computer.

Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.

Click on ‘PDA’ / ‘AP’ and select the file ‘CF-Auto-Root-klte-kltexx-smg900f.tar.md5‘.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options, if not already.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.

Step 11 - After you see the home screen, unplug your phone from the computer.

NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.

OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:

Step 11 - Pull out the battery to turn OFF the phone forcefully.

Step 12 - Now boot (turn ON your phone) with Volume Up + Home + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.

That’s it! Your Samsung Galaxy S5 has now been rooted on Android 4.4.2 official software update. Check for the SuperSU app in your apps list to verify.

Unknown

Add Comment

android-4-4-kitkat