Root XXUENC3 Android 4.3 on Galaxy Note 2 LTE N7105 Jelly Bean Official Firmware

Want a information on the best way to root XXUENC3 Android 4.three on Galaxy Note 2 N7105? You've come to the right website. This tutorial later in this publish will let you know precisely how to carry out the steps for getting root access in your phone. After testing and experimenting with different root methods, we now have compiled the most easiest and easiest one. This root method will apply on XXUENC3 Android 4.three firmware for Galaxy Note 2 LTE. Before going forward, you must know that rooting your device will void your warranty. We would be using CF-Auto-Root as our primary root tool. This root technique tutorial will only install root access and SuperSU utilizing ODIN. Doubt Rooting your device? Learn: Advantages of rooting an Android device. You may root Galaxy Note 2 N7105 on XXUENC3 Android 4.three Jelly Bean official firmware using the tutorial below.

As you continue studying further, we will information you through the entire technique of methods to root XXUENC3 Android 4.three on Samsung Galaxy Note 2 N7105 using ODIN. Be sure to backup all your knowledge earlier than trying out the root method tutorial under as a result of we don’t need you to lose anything. Rooting will mean you can set up root apps in your phone, i.e Titanium Backup. Read our checklist of the essential root apps accessible! The next tips are important as they will help the rooting procedure to go easy with none issues. Let’s proceed with the tutorial now.

Complete Step-By-Step Instructions:

Step 1 - Download Root XXUENC3 Android 4.3 Package for Samsung Galaxy Note 2 to your computer and extract the zip file.

Step 2 - Download ODIN v3.09 which will help you to root XXUENC3 Android 4.3 on Samsung Samsung Galaxy Note 2 N7105.

Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 - Make sure you have your Samsung Galaxy Note 2 USB drivers installed on your computer.

Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.

Click on ‘PDA’ and select the file ‘CF-Auto-Root-t0lte-gtn7105.zip‘.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options, if not already.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.

Step 11 - After you see the home screen, unplug your phone from the computer.

NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.

OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:

Step 11 - Pull out the battery to turn OFF the phone forcefully.

Step 12 - Now boot (turn ON your phone) with Volume Up + Home + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.

That’s it! Your Samsung Galaxy Note 2 has now been rooted on XXUENC3 Android 4.3 official software update. Check for the SuperSU app in your apps list to verify.

Unknown

Add Comment

android-4-3