XWCNA1 Android 4.2.2 Jelly Bean update can now be put in in your Galaxy Note 8.zero, the WiFi + 3G variant. We predict a Android 4.three Jelly Bean to return out very soon however right now we would not have any form of ETA. Samsung has just introduced this firmware so likelihood is slim that you would be able to get this update from Samsung KIES or OTA (over-the-air) system. We have now a whole information on learn how to set up this new firmware manually on your tablet using ODIN. You can simply update Galaxy Note 8.zero N5100 to XWCNA1 Android 4.2.2 Jelly Bean using the tutorial below. Be mindful, this is an official firmware not a custom construct ROM.
As you continue studying under, we will information you through all the technique of the best way to install XWCNA1 Android 4.2.2 on Galaxy Note 8.0 N5100 utilizing ODIN. Don’t overlook to backup all your apps and personal information as you by no means know if you may end up with a problem. We even have some important ideas that we advocate you to read and be mindful earlier than continuing to the tutorial on the following page. We worth your data and in addition your device’s security so now we have talked about tips and quick cuts throughout the information and also we want you to verify if your knowledge has been backed up. Let’s continue with the tutorial below.
How to Update Galaxy Note 8.0 N5100 to Android 4.2.2 XWCNA1 Jelly Bean
We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy Note 8.0 to Android 4.2.2 XWCNA1 Jelly Bean. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.
Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.
Complete Step-By-Step Instructions:
Step 2 - Download ODIN v3.09 which will help you to install Android 4.2.2 on Samsung Galaxy Note 8.0 N5100.
Step 3 - Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy Note 8.0 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your tablet to your computer while it is in the Download Mode.
Step 6 - If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your tablet. These files are to be found from the extracted files in Step 1.
- Click on ‘AP/PDA’ and select file with ‘CODE’ in its name.
- Click on ‘CP/Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your tablet will restart. After you see the home screen, unplug your tablet from the computer.
That’s it. Your Samsung Galaxy Note 8.0 has now been updated to Android 4.2.2 build XWCNA1 software update. Go to Settings > About phone to verify.
Tentang Blog
Share everything about CSS Trick and Tips
Follow: | Google+ | Facebook |
Enter your email address to get update from CSS Tuts.
Related Posts
Blogger
Google+
Facebook
Twitter