Samsung Galaxy S5 G900H has acquired the XXU1ANCI Android 4.4.2 firmware - the most recent KitKat software replace for this phone. Galaxy S5 G900H is the 3G model of this new Android phone and has just launched yesterday everywhere in the world. Just along with that, its first firmware can now be downloaded for manual installation. Most of you might have already tried to modify the device, in that case you need to use this information to return to official firmware with all of the manufacturing unit settings. You can simply update Galaxy S5 G900H to XXU1ANCI Android 4.4.2 KitKat official firmware- and likewise root Galaxy S5 G900H phone on this firmware. No custom restoration (ClockworkMod) or a rooted phone is required for this tutorial.
As you proceed reading under, we'll information you the way to install XXU1ANCI Android 4.4.2 KitKat on Galaxy S5 G900H using ODIN. We have additionally given some tips about easy methods to backup your phone data and have given another essential tips. Don’t overlook to backup all your apps and personal data as a precaution. We don’t need anyone dropping their knowledge on account of any issues. A backup of present knowledge present on the device must be made as their is a potential of knowledge being wiped to the unique factory image. Let’s proceed with the tutorial now.
Complete Step-By-Step Instructions:
Step 1 - Download Android 4.4.2 G900HXXU1ANCI for Galaxy S5 to your computer and extract the zip file.
Step 2 - Download ODIN v3.09 which will help you to install Android 4.4.2 on Samsung Galaxy S5 G900H.
Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode. Read: How to Enter Download Mode on Galaxy S5.
Step 4 - Make sure you have your Galaxy S5 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
- Click on ‘AP’ and select file with ‘AP’ in its name.
- Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
- Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.
If you are using an older version of ODIN or flashing a firmware which doesn’t have the above mentioned file name format then look below for the abbreviations to the old name format. Do note that only file name changes, the functionality and back end process remains the same so don’t worry.
- AP = PDA
- BL = Boot Loader
- CP = Modem
Step 8 - In ODIN, check the
Auto Reboot and
F. Reset Time options. As for the
Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your
Samsung Galaxy S5 has now been updated to Android 4.4.2 build XXU1ANCI firmware update. Go to Settings > About phone to verify.
Tentang Blog
Share everything about CSS Trick and Tips
Follow: | Google+ | Facebook |
Enter your email address to get update from CSS Tuts.
Related Posts
Blogger
Google+
Facebook
Twitter