Root Galaxy TabPRO 10.1 T525 LTE on Android 4.4.2 Stock Firmware

A complete tutorial on learn how to root Galaxy TabPRO 10.1 T525 (LTE version) is now available -we have now already covered the WiFi only version. This tutorial works with all Galaxy TabPRO 10.1 devices that include Android 4.4.2 KitKat in them. Why must you root? Read: Benefits of rooting an Android device. This tutorial does not require you to install ClockworkMod restoration as we might be utilizing ODIN to perform the root tutorial. You can now root Android 4.4.2 KitKat on Galaxy TabPRO 10.1 T525 official firmware utilizing the tutorial below. How does this software work? We have quickly defined the method beneath in this publish for these curious ones.

As you read further, we are going to guide you through the complete strategy of how to root Galaxy TabPRO 10.1 T525 on Android 4.4.2 official firmware. It is not actually vital, however please be sure to backup your tablet as a precaution and in addition read all the essential suggestions given beneath earlier than proceeding to the tutorial. Read our listing of the important root apps out there! Also ensure, your tablet is up to date to the newest most software program replace accessible for this tablet on Samsung KIES. Let’s continue under to the tutorial.

Complete Step-By-Step Instructions:

Step 1 - Download Root Package – CF-Auto-Root for Samsung Galaxy TabPRO 10.1 to your computer and extract the zip file.

Step 2 - Download ODIN v3.09 which will help you to root Android 4.4.2 on Samsung Galaxy TabPRO 10.1 T525.

Step 3 - Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 - Make sure you have your Samsung Galaxy TabPRO 10.1 USB drivers installed on your computer.

Step 5 - Open ODIN on your computer. Connect your tablet to your computer while your tablet is in the Download Mode.

Step 6 - If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the file that you have to flash/install on your tablet. This file will be found from the extracted file in Step 1.

Click on ‘PDA’ / AP and select the file ‘CF-Auto-Root-picassolte-picassoltexx-smt525.zip‘.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options, if not already.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your tablet will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.

Step 11 - After you see the home screen, unplug your tablet from the computer.

NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.

OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:

Step 11 - Pull out the battery (or keep holding the Power button) to turn OFF the tablet forcefully.

Step 12 - Now boot (turn ON your tablet) with Volume Down + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.

That’s it! Your Samsung Galaxy TabPRO 10.1 T525 has now been rooted on Android 4.4.2 official software update. Check for the SuperSU app in your apps list to verify.

Unknown

Add Comment

android-4-4-kitkat