Root Samsung Galaxy Note 10.1 P600 on Android 4.3 Jelly Bean Official Firmware

You can now root Galaxy Note 10.1 SM-P600 (2014 version - WiFi only) on the newest Android 4.three Jelly Bean firmware and above. Samsung has just launched the Galaxy Note 10.1 P600 and it's being currently sold with Android 4.three pre-installed. With a purpose to root Galaxy Note 10.1 P600 on Android 4.3, you can just observe our tutorial given below. Not certain about what you would achieve by rooting? Read: Advantages of rooting an Android device. Now you can root Android 4.3 Jelly Bean on Galaxy Note 10.1 P600 official firmware utilizing the tutorial below.

As you learn further, we'll information you through the whole process of find out how to root Galaxy Note 10.1 SM-P600 on Android 4.3 official firmware. Right now, there are two fundamental methods to root: ClockworkMod recovery (CWM) methodology or ODIN will be used. We want the ODIN method because it is extremely easy to carry out and rapidly roots your device. It's not really necessary, however please make sure you backup your tablet as a precaution and likewise read all of the essential suggestions given beneath earlier than proceeding to the tutorial. Read our record of the important root apps obtainable! Let’s proceed beneath to the tutorial.

Complete Step-By-Step Instructions:

Step 1 - Download Root Package – CF-Auto-Root for Samsung Galaxy Note 10.1 to your computer and extract the zip file.

Step 2 - Download ODIN v3.09 which will help you to root Android 4.3 on Samsung Samsung Galaxy Note 10.1 P600.

Step 3 - Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 - Make sure you have your Samsung Galaxy Note 10.1 USB drivers installed on your computer.

Step 5 - Open ODIN on your computer. Connect your tablet to your computer while your tablet is in the Download Mode.

Step 6 - If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the file that you have to flash/install on your tablet. This file will be found from the extracted file in Step 1.

Click on ‘AP’ and select the file ‘CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip‘.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options, if not already.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your tablet will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.

Step 11 - After you see the home screen, unplug your tablet from the computer.

NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.

OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:

Step 11 - Keep holding the Power button to turn OFF the tablet forcefully.

Step 12 - Now boot (turn ON your tablet) with Volume Down + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.

That’s it! Your Samsung Galaxy Note 10.1 (2014 Edition) has now been rooted on Android 4.3 Jelly Bean official software update. Check for the SuperSU app in your apps list to verify.

Unknown

Add Comment

samsung