One of many latest firmwares for this tablet is XXUBMK1 Android 4.3, that can be installed on the Galaxy Note 10.1 SM-P600. This tablet has just started selling out in various countries and regions, so we must always expect a extra frequent firmware updates now from Samsung. P600XXUBMK1 is an official firmware and may be downloaded from Samsung KIES, or from the manual tutorial given beneath at Group Android. Not all areas get the identical firmware replace, so for those who are prepared to install it manually, we've a tutorial below. You don't want to root Galaxy Note 10.1 or install a custom recovery since we will likely be utilizing ODIN to flash this firmware. You possibly can easily install XXUBMK1 Android 4.three on Galaxy Note 10.1 P600 by following the step-by-step tutorial beneath - and in addition root this tablet!
As you continue studying under, we are going to guide you thru how you can backup information, some important tips and the entire strategy of how you can update Galaxy Note 10.1 P600 to XXUBMK1 Android 4.3 official firmware with all of the steps required to do so. This can be a fully unbranded firmware, which suggests, you may install this firmware on any Galaxy Note 10.1 P600 however can get some extra language packs depending on the region. Don’t neglect to learn all the necessary suggestions given below. The next ideas are important as they may assist the set up procedure to go clean without any issues. Let’s proceed with the tutorial now.
All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial
XXUBMK1 Android 4.3 Firmware Details:
Model: SM-P600
Model name: Galaxy Note 10.1 2014 Edition
Country: Morocco
Version: Android 4.3
Changelist: 1710482
Build date: Mon, 11 Nov 2013 12:12:54 +0000
Product Code: FWD
PDA: P600XXUBMK1
CSC: P600OJVBMK1
Complete Step-By-Step Instructions:
Step 2 - Download ODIN v3.09 which will help you to install Android 4.3 on Samsung Galaxy Note 10.1 P600.
Step 3 - Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Down + Power buttons together, till you see the Samsung logo or the construction Android robot and a triangle. This is the Download Mode.
Step 4 - Make sure you have your Galaxy Note 10.1 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect Galaxy Note 10.1 to your computer while the tablet is in the Download Mode.
Step 6 - If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your tablet. These files are to be found from the extracted files in Step 1.
- Click on ‘AP’ and select file with ‘CODE’ in its name or the only firmware file.
- Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your tablet will restart. After you see the home screen, unplug your tablet from the computer.
That’s it. Your Samsung Galaxy Note 10.1 has now been updated to XXUBMK1 Android 4.3 firmware. Go to Settings > About tablet to verify.
Tentang Blog
Share everything about CSS Trick and Tips
Follow: | Google+ | Facebook |
Enter your email address to get update from CSS Tuts.
Related Posts
Blogger
Google+
Facebook
Twitter